Filter
Top Products
Removing a Port Adapter
PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration
5-2
Figure 5-1 Cisco uBR7200 Series with a PA-FE-TX in Slot 2—Cisco uBR7246
Figure 5-2 shows a PA-FE-FX installed in slot 2 of a Cisco uBR7200 series router.
Figure 5-2 Cisco uBR7200 Series with an PA-FE-FX in Slot 2—Cisco uBR7246
Removing a Port Adapter
Use the following procedure to remove a port adapter from a Cisco uBR7200 series universal
broadband router:
Step 1 Attach an ESD-preventive wrist strap between you and an unfinished chassis surface.
Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do
not directly touch the backplane with your hand or any metal tool, or you could shock yourself.
Step 2 Unlock the retaining mechanism of the port adapter:
— For a Cisco uBR7246, slide the port adapter retention clip for the desired port adapter slot
down in the unlocked position. The retention clip remains in the unlocked position.
(See Figure 5-3.)
H11503
PA-FE-TX port
adapter
H11504
PA-FE-FX port adapter