Filter
Top Products
Organization
vi
PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration
Organization
This document is organized into the following chapters:
Related Documentation
Your router and the Cisco IOS software running on it contain extensive features and functionality,
which are documented in the following resources:
• ForCisco IOS software configuration information and support,refer to the modular configuration
and modular command reference publications in the Cisco IOS software configuration
documentation set that corresponds to the software release installed on your Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and
maintenance documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
• For hardware installation and maintenance information on Cisco 7000 series and Cisco 7500
series routers, and the VIP2, refer to the following publications:
— The installation and configuration guide that shipped with your Cisco 7000 series or
Cisco 7500 series router
— Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for
VIP2 users only)
Section Title Description
Chapter 1 Overview Provides information about the PA-FE-TX and
PA-FE-FX 100BaseT port adapters, illustrates
their location in the supported hardware
platforms, and describes their LED displays,
cables, and receptacles
Chapter 2 Preparing for Installation Provides information about safety considerations,
tools required, and procedures you should
perform before the actual installation
Chapter 3 VIP2 and the PA-FE Port Adapters Provides instructions for installingthe PA-FE port
adapters on aVIP2 interface processor installedin
a Cisco 7500 or Cisco 7000 series router
Chapter 4 Cisco 7200 Series and the PA-FE
Port Adapters
Provides instructions for installingthe PA-FE port
adapters in a Cisco 7200 series router
Chapter 5 Cisco uBR7200 Series and the
PA-FE Port Adapters
Provides instructions for installingthe PA-FE port
adapters in a Cisco uBR7200 series universal
broadband router
Chapter 6 Cisco 7100 Series andthe PA-FE-TX
and PA-FE-FX
Provides instructions for installingthe PA-FE port
adapters in the Cisco 7100 series routers
Chapter 7 Installing PA-FE Port Adapter
Interface Cables
Provides instructions for installing PA-FE port
adapter cables on supported platforms
Chapter 8 Configuring PA-FE Port Adapter
Interfaces
Provides instructions for configuring PA-FE port
adapter interfaces on supported platforms