Filter
Top Products
Cisco uBR7200 Series and the PA-FE Port Adapters 5-3
Removing a Port Adapter
Figure 5-3 Placing the Port Adapter Retention Clip in the Unlocked
Position—Cisco uBR7246
— For a Cisco uBR7223, place the port adapter lever in the unlocked position. (See Figure 5-4.)
Figure 5-4 Placing the Port Adapter Lever in the Unlocked Position—Cisco uBR7223
Step 3
Grasp the handle on the port adapter and pull the port adapter from the router midplane,
about halfway out of its slot. If you are removing a blank port adapter, pull the blank port
adapter completely out of the chassis slot.
Note As you disengage the port adapter from the router midplane, OIR administratively
shuts down all active interfaces on the port adapter.
Step 4 With the port adapter halfway out of the slot, disconnect all cables from the port adapter.
Step 5 After disconnecting the cables, pull the port adapter from its chassis slot.
H11518
Port adapter
retention clip in
unlocked position
Port adapters
16217
Port adapter
lever in unlocked
position
Port adapters