Filter
Top Products
viii
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
OL-6514-04
Preface
Organization
• Cisco 7500 series routers, which consist of the 5-slot Cisco 7505, the 7-slot Cisco 7507, and the
13-slot Cisco 7513 routers.
• Cisco 7600 series routers, which consist of the 3-slot Cisco 7603, the 6-slot Cisco 7606, the 9-slot
Cisco 7609, and the 13-slot Cisco 7613 routers, using FlexWAN and Enhanced FlexWAN modules.
Organization
This document contains the following chapters:
:
Related Documentation
Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
• Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
Note You can access Cisco IOS software configuration and hardware installation and maintenance
documentation on the World Wide Web at http://www.cisco.com. Translated documentation
is available at the following URL: http://www.cisco.com/public/countries_languages.shtm
• Cisco 7200 VXR routers:
–
For an online directory to quickly access documents for Cisco 7200 VXR routers, refer to the
Cisco 7200 Series Routers Documentation Roadmap at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps341/products_documentation_roadmap09
186a00801c0915.html
–
For hardware installation and maintenance information, refer to the Cisco 7200 VXR
Installation and Configuration Guide or the Cisco 7200 VXR Routers Quick Start Guide.
–
For port adapter hardware installation and memory configuration information, refer to the
Cisco 7200 Series Port Adapter Hardware Configuration Guidelines.
Section Title Description
Chapter 1 PA-POS-1OC3 Overview Describes the PA-POS-1OC3 and its LEDs and cables.
Provides supporting information about addressing,
networks, and SONET.
Chapter 2 Preparing for Installation Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
Chapter 3 Removing and Installing the
PA-POS-1OC3
Provides instructions for removing and installing the
PA-POS-1OC3 port adapter
Chapter 4 Configuring the PA-POS-1OC3 Provides instructions for configuring the
PA-POS-1OC3 on the supported platforms.