Filter
Top Products
VPN
Client to Gateway
90 Cisco RV320/RV325 Administration Guide
9
- Remote Backup IP Address—Alternative IP address for the remote
peer, or reenter the WAN IP address that was already set for the remote
gateway.
- Local Interface—WAN interface to use to reestablish the connection.
- VPN Tunnel Backup Idle Time—When the router boots up and the
primary tunnel is not connected within the specified period, the backup
tunnel is used. The default idle time is 30 seconds.
• Split DNS—Sends some of the DNS requests to one DNS server and other
DNS requests to another DNS server, based on specified domain names.
When the router receives an address resolution request from client, it
inspects the domain name. If it matches one of the domain names in the
Split DNS settings, it passes the request to the specified DNS server.
Otherwise, the request is passed to the DNS server that is specified in the
WAN interface settings.
DNS Server 1 and DNS Server 2—IP address of the DNS server to use for
the specified domains. Optionally, specify a secondary DNS server in the
DNS Server 2 field.
Domain Name 1 through Domain Name 4—Specify the domain names for
the DNS servers. Requests for these domains are passed to the specified
DNS server(s).
Client to Gateway
This feature creates a new VPN tunnel to allow teleworkers and business travelers
to access your network by using third-party VPN client software, such as
TheGreenBow.
To open this page, select VPN > Client to Gateway in the navigation tree.
Configure a VPN tunnel for one remote user, a group VPN for multiple remote
users, or Easy VPN:
• Tunnel—Creates a tunnel for a single remote user. The tunnel number is
automatically generated.