Filter
Top Products
24 Cisco IOS for S/390 Release 2.0 Release Notes
Installing Cisco IOS for S/390 Release 2.0
Media media_name is now operational with one or more active interfaces.
Callable System Services Library
You must have the Callable System Services library, SYS1.CSSLIB, available for the installation.
Modules from this library are linked with Cisco IOS for S/390 release 2.0 for OpenEdition support.
This library is distributed with MVS/ESA. If you do not have this library available, OpenEdition
support will not function properly.
TSO/E
New users must verify that the IBM program product TSO/E is installed. Cisco IOS for S/390
configuration files are parsed using TSO/E parsing routines and S0C4 ABENDs can result if these
routines are not available.
ACF/2
For some users of CA-ACF2, the CA-ACF2 fixes listed here affect the way the Cisco IOS for S/390
SAF security interface to CA-ACF2 works. These fixes should be reviewed by the CA-ACF2
Systems Programmer to determine if they are still applicable or have been superseded by later
maintenance.
Table 12 CA-ACF2 Fixes
SAS/C Release Level
Cisco IOS for S/390 release 2.0 is designed to work with SAS/C Release 6.00, which is included
with the product. If you are not running with the correct SAS/C libraries, unpredictable results may
occur.
The zap associated with Usage Note 1670 for SAS/C 6.0 must be applied in order to run applications
via IUCV over the SAS LSCNCOM interface, including SAS/connect.
Asynchronous Sockets
Cisco IOS for S/390 release 2.0 supports asynchronous socket calls from OpenEdition. The
following system levels are required to run this option:
• OS/390 V1.3 requires PTF level 9705 or higher
• DB2 V5 requires PTF level 9708 or higher
ACF2 Rrelease 2.0
Fixes ACF2 R6.0 Fixes
TW87092 G016544
TW95626 G025907
TW95673 G023824
CO96846 G026166
CO97436 G026702
G031029
TA1294B