Filter
Top Products
Cisco IOS for S/390 Release 2.0 Release Notes 41
ROUTE Parameters
Figure 6 NETWORK Parameters
ROUTE Parameters
The following diagram shows the routing statements from Cisco IOS for S/390 release 1.0 and their
usage in Cisco IOS for S/390 release 2.0. Most important to notice is that the old ROUTE NET
parameter is now a ROUTE MEDIANAME parameter.
Parameters removed from release 1.0:
• NET
• ARPTABLE NAME, TYPE
• ARP FLAGS, MTU, TRUNK, TYPE
Parameters renamed for release 2.0:
• ROUTE -> ROUTER
New parameters for release 2.0.
• ARP MAC, MEDIANAME
ACPCFG00 TCPCFG00
NAME(name)
ARPIPTIMEOUT(num)
ARPTIMEOUT(num)
ARPTABLE(
name)
MSSDEF(num)
MSSOPT(NEVER|SUBNET|
HOST(internet_addr)
NETWORK
NAME(name)
ARPTIMEOUT(router host)
ETHERNET|VIRTUAL|TOKEN4|
TOKEN16|FDDI|HYPERCHANNEL|
CLAW|CLDC
IPADDRESS(num)
MEDIA
NET|ALWAYS)
MSSDEF(num)
MSSOPT(NEVER|SUBNET|
NET|ALWAYS)
MTU(num)
IDLENET(seconds count)
CHECKSUM(HOST|YES|
OFFLOAD|NO)
MTU(num)
IDLENET(seconds count)
HOSTCKSUM|OFFLOADCKSUM
DEST(internet_addr)
SUBNET(mask)
LNID(
name1...namex)
LOOP|NOLOOP
NETWORK
DEST(internet_addr)
SUBNETMASK(mask)
NETMASK(mask)
MEDIANAME(name)
METRIC(num)