Filter
Top Products
1-7
Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01
Chapter 1 Product Overview
Front-Panel LEDs
STATUS Green On after successful boot up.
Flashing during boot up.
POWER Green Power is on.
MGMT
10/100 LEDs
ACT (Activity LED) Green (Left) Link is active.
SPEED Yellow (Right) Port speed is 100 Mbps.
HA 10/100
LEDs
ACT (Activity LED) Green (Left) Link is active.
SPEED Yellow (Right) Port speed is 100 Mbps.
FC 1 through
FC 8 LEDs
ACT (Activity LED) Yellow Frames are being sent or received.
LOG (Logged-In
LED)
Green On (continuously) indicates that the port is properly
connected and able to communicate with its attached
devices.
When credits from the donor port are being added to
another port, the donor port's LOG LED is on to show
that the port's buffers are in use. For more
information about donor ports, refer to the Cisco
SN 5428-2 Storage Router Software Configuration
Guide.
Flashing once per second indicates that the port
connection is in the process of logging in.
Flashing twice per second indicates that the port
connection is broken or an error condition exists with
the port. For troubleshooting information refer to
“Troubleshooting a Connection to a Fibre Channel
Port” section on page 3-6.
Table 1-1 LED Indication Descriptions (continued)
LED Color Description (when LED is on)