Filter
Top Products
Chapter 2 Installing the SN 5428-2 Storage Router
Installing SFP Modules
2-22
Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01
To remove a bale clasp SFP module from a port, perform the following steps:
Step 1 Open the bale clasp on the SFP module with your index finger in a downward
direction. (See Figure 2-19.) If the bale clasp is obstructed and you cannot use
your index finger to open it, use a small, flat-blade screwdriver or other long,
narrow instrument to open the bale clasp. (See Figure 2-20.)
Step 2 Grasp the SFP module between your thumb and index finger and carefully remove
it from the port. (See Figure 2-19.)
Figure 2-19 Removing a Bale Clasp SFP Module with Your Index Finger
85666