Filter
Top Products
2-7
Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01
Chapter 2 Installing the SN 5428-2 Storage Router
Installing the SN 5428-2 Chassis
Rack-Mounting the SN 5428-2 Storage Router
You can rack-mount the SN 5428-2 Storage Router chassis in a 19-inch
equipment rack with the front panel forward.
You need the following tools to install the storage router in a rack:
• #2 Phillips screwdriver
• Tape measure
To install the storage router in a rack, follow these steps:
Step 1 Locate the following rack-mount components in the accessory kit shipped with
your storage router:
• Two mounting brackets labeled RIGHT and LEFT. (See Figure 1.)
• Two sets of rack rails. Each set consists of a rail labeled FRONT and a rail
labeled REAR. (See Figure 2.)
• Two cable guides (with black mounting screws).
• Assorted screws and fasteners (use as needed).
Figure 1 Mounting Brackets
85500
Left
Right