Filter
Top Products
Chapter 2 Installing the SN 5428-2 Storage Router
Installing SFP Modules
2-18
Cisco SN 5428-2 Storage Router Hardware Installation Guide
OL-4797-01
To remove the SFP module from the port, pull the tab gently in a slightly
downward direction until it disengages from the port, and then pull the SFP
module out. (See Figure 2-13.)
Figure 2-13 Removing a Mylar Tab SFP Module
Actuator/Button SFP Modules
The actuator/button SFP module has a button that you must push to remove the
SFP module from a port. (See Figure 2-14.)
Figure 2-14 Actuator/Button SFP Module
To insert the actuator/button SFP module into a port, line up the SFP module with
the port and slide it in until the actuator/button clicks into place. (See
Figure 2-15.) Be sure not to press the actuator/button as you insert the SFP
module because you might inadvertently disengage the SFP module from the port.
85662
63066