Filter
Top Products
show controller cable-modem bpkm
Troubleshooting Tips for the Cisco uBR904 Cable Modem 19
show controller cable-modem bpkm
To display information about the baseline privacy key management exchange between the cable
modem and the headend CMTS, use the show controller cable-modem bpkm Privileged EXEC
command.
show controller cable-modem number bpkm
Syntax Description
Command Mode
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3 NA.
Sample Display
The following output is displayed when the headend CMTS does not have baseline privacy enabled:
uBR904# show controller cable-modem 0 bpkm
CM Baseline Privacy Key Management
configuration (in seconds):
authorization wait time: 10
reauthorization wait time: 10
authorization grace time: 600
operational wait time: 1
rekey wait time: 1
tek grace time: 600
authorization rej wait time: 60
kek state: STATE_B_AUTH_WAIT
sid 4:
tek state: No resources assigned
Related Commands
show controller cable-modem
show controller cable-modem des
show controller cable-modem filters
show controller cable-modem lookup-table
show controller cable-modem mac
show controller cable-modem phy
show controller cable-modem tuner
show interface cable-modem
number Controller number inside the cable modem.