Filter
Top Products
debug cable-modem map
Troubleshooting Tips for the Cisco uBR904 Cable Modem 53
debug cable-modem map
Use the debug cable-modem map Privileged EXEC command to display the timing from MAP
messages to sync messages and the timing between MAP messages. The no form of this command
disables debugging output.
[no] debug cable-modem map
Usage Guidelines
This command first appeared in Cisco IOS Release 11.3 NA.
Sample Display
Figure 11 shows display output for the debug cable map Privileged EXEC command.
Figure 11 Sample Debug Cable-Modem Map Output
uBR904# debug cable-modem map
Cable Modem MAP debugging is on
uBR904#
*Mar 7 20:12:08: 595322.942: Min MAP to sync=72
*Mar 7 20:12:08: 595322.944: Max map to map time is 40
*Mar 7 20:12:08: 595322.982: Min MAP to sync=63
*Mar 7 20:12:08: 595323.110: Max map to map time is 41
*Mar 7 20:12:08: 595323.262: Min MAP to sync=59
*Mar 7 20:12:08: 595323.440: Max map to map time is 46
*Mar 7 20:12:09: 595323.872: Min MAP to sync=58
Related Commands
debug cable-modem bpkm
debug cable-modem bridge
debug cable-modem error
debug cable-modem interrupts
debug cable-modem mac