Filter
Top Products
Command Reference
30
Release 11.3(4)NA
CMAC_LOG_RESET_PRIVACY_WATCHDOG_EXPIRED
The baseline privacy exchange with the CMTS took
too long.
CMAC_LOG_RESET_CHANGE_US_WATCHDOG_EXPIRED
The cable modem was unable to transmit a response to
a UCC-REQ message.
CMAC_LOG_RESET_SECURITY_WATCHDOG_EXPIRED
The “full security” exchange with the CMTS took too
long.
CMAC_LOG_RESET_CONFIG_FILE_WATCHDOG_EXPIRED
The TFTP server took too long to respond.
CMAC_LOG_RESET_ALL_FREQUENCIES_SEARCHED
All downstream frequencies to be searched have been
searched.
This message indicates that downstream frequencies
were found and the cable modem failed.
CMAC_LOG_RESET_T2_EXPIRED
Initial ranging opportunities are not being received.
CMAC_LOG_RESET_T3_RETRIES_EXHAUSTED
The CMTS failed to respond to a RNG-REQ message
too many times.
CMAC_LOG_RESET_RANGING_ABORTED
The CMTS commanded the cable modem to abort the
ranging process.
CMAC_LOG_RESET_NO_MEMORY
The cable modem has run out of memory.
CMAC_LOG_RESET_CANT_START_PROCESS
The cable modem was unable to start an internal
process necessary to complete ranging and registration.
CMAC_LOG_RESET_CONFIG_FILE_READ_FAILED
The reading of the configuration file from the TFTP
server failed. The file might not exist, or it has incorrect
permissions.
CMAC_LOG_RESET_AUTHENTICATION_FAILURE
The cable modem failed authentication, as indicated in
a REG-RSP message from the CMTS.
CMAC_LOG_RESET_SERVICE_NOT_AVAILABLE
The CMTS has failed the cable modem’s registration
because a required or requested Class Of Service is not
available.
CMAC_LOG_RESET_T6_RETRIES_EXHAUSTED
The CMTS failed to respond to a REG-REQ message
too many times.
CMAC_LOG_RESET_MAINTENANCE_WATCHDOG_DRIVER
The cable modem MAC layer failed to detect a change
in the interface driver.
CMAC_LOG_RESET_NET_ACCESS_MISSING
The Network Access parameter was missing from the
DOCSIS configuration file.
CMAC_LOG_RESET_FAILED_WRITE_ACCESS_CONTROL
The cable modem was unable to set the Write Access
Control for an SNMP parameter, as specified by the
DOCSIS configuration file.
CMAC_LOG_RESET_DHCP_FAILED
The DHCP server did not respond with all the required
values. The required values are: IP address, network
mask, TFTP server IP address, time server IP address,
DOCSIS configuration file name, and time zone offset.
CMAC_LOG_RESET_CANT_START_DS_TUNER_PRCESS
The modem was unable to start the internal process
used to manage the downstream tuner.
CMAC_LOG_RESET_TOO_MANY_DS_LOCKS_LOST
Downstream QAM/FEC lock has been lost too many
times.
Table 2 Possible but Uncommon Cable Interface Reset Causes (Continued)
Message Description