Filter
Top Products
Configuration | System | Servers | Accounting | Add or Modify
5-13
VPN 3000 Concentrator Series User Guide
To remove a configured user authentication server, select the server from the list and click Delete. There
is no confirmation or undo. The Manager refreshes the screen and shows the remaining entries in the
Accounting Servers list.
To change the priority order for configured servers, select the entry from the list and click
Move ↑ or
Move ↓. The Manager refreshes the screen and shows the reordered Accounting Servers list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click the
Save Needed icon at the top of the Manager
window.
Configuration | System | Servers | Accounting | Add or Modify
These screens let you:
Add: Configure and add a new RADIUS user accounting server.
Modify: Modify parameters for a configured RADIUS user accounting server.
Figure 5-13: Configuration | System | Servers | Accounting | Add or Modify screen
Accounting Server
Enter the IP address or hostname of the RADIUS accounting server; e.g., 192.168.12.34. (If you have
configured a DNS server, you can enter a hostname in this field; otherwise, enter an IP address.)
Server Port
Enter the UDP port number by which you access the accounting server. The default is 1646.
Timeout
Enter the time in seconds to wait after sending a query to the accounting server and receiving no
response, before trying again. Minimum is
1 second (the default), maximum is 30 seconds.