Filter
Top Products
CBM-710/720 Service Manual
21
1. Maintenance and Handling
1) Precautions for Handling
(1) Precautions for use
Do not cut the paper other than the specified recording paper or do not pull the recording paper on the
way of cutting; otherwise, resulting in damage of the blade section and reduction of service life.
(2) Precautions for storage
Store the unit avoiding dust, dirt, high temperature and high humidity.
2) Cleaning
(1) Remove the dust of recording paper properly.
A good cleaning can be given by using the vacuum cleaner, etc.
(2) Use alcohol or benzine as a clearing solvent.
Thinner, trichlene, ketone, etc. may damage the plastic parts.
(3) After cleaning, lubricate as needed.
3) Lubrication
Lubrication is not especially required within 150,000 cuts.
However, the blade operates slow, oil is used up for cleaning, and disassembly, assembly and replacement
are made, lubrication should be required.
Gear pivot Maltenp Brushing
Lock level shaft " "
Crank pin Mo grease "
Movable blade sliding section " "