Filter
Top Products
Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications
Pin Assignments | Battery Pack Operations
Service Considerations
Listed below are some of the considerations that you should keep in mind during the disassembly
and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
● Torx T-8 or T-9 screwdriver
● 5mm nut drivers (for screwlocks and standoffs)
● Small standard screwdriver
● Small Phillips screwdriver
● Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the
reassembly process, it can damage the unit. Compaq strongly recommends that all screws
removed during disassembly be kept with the part that was removed, then returned to their
proper locations.
IMPORTANT:
As each subassembly is removed from the computer, it should be placed away
from the work area to prevent damage.
Return to Removal & Replacement Procedures
privacy and legal statement