Filter
Top Products
Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures |
Specifications
Pin Assignments | Battery Pack Operations
Removal & Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Status Panel
Internet
Button Board
Heatspreader
Network
Interface Card
Modem
Hard Drive
DisqPlay
Module
Processor
DVD or
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removing
the Hard
Drive
NOTE:
Illustrations
may show
parts
removed
that are not
part of this
procedure.
It is
necessary
to remove
only the
parts listed
in the
written
procedure.
To remove the hard
drive, complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touchpad.
3. Remove three
screws from the
hard drive mounting
bracket, disconnect
the hard drive data
cable and lift out the
hard drive with
drive mounting
bracket attached.
Next Step
privacy and legal statement