Filter
Top Products
Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures |
Specifications
Pin Assignments | Battery Pack Operations
Removal & Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Status Panel
Internet
Button Board
Heatspreader
Network
Interface Card
Modem
Hard Drive
DisqPlay
Module
Processor
DVD or
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removing
the
Network
Interface
Card
To remove the
Network
Interface Card
(NIC), complete
the following
steps:
1.
Prepare the
computer for
disassembly.
2. Remove the
palmrest cover
with touchpad.
3. Remove the
keyboard.
4. Remove the
heatspreader.
5. Remove two
screws from the
Network
Interface Card,
lift the Network
Interface Card
off the system
board and
disconnect the
cable from the
Network
Interface Card.
To replace the
Network
Interface Card,
reverse the
previous
procedures.
privacy and legal statement