Filter
Top Products
Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures |
Specifications
Pin Assignments | Battery Pack Operations
Removal & Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Status Panel
Internet
Button Board
Heatspreader
Network
Interface Card
Modem
Hard Drive
DisqPlay
Module
Processor
DVD or
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removing the System Board
To remove the system board, complete the following steps:
1. Prepare the
computer for disassembly.
2. Remove the palmrest cover with touchpad.
3. Remove the keyboard.
4. Remove the heatspreader.
5. Remove the status panel assembly.
6. Remove the Internet Button board.
7. Remove the display panel assembly.
8. Remove the hard drive.
9. Remove the Upper CPU cover.
10. Disconnect the DisqPlay module cable from the system board.
11. Remove the processor.
12. Remove the modem.
13. Remove the Network Interface Card.
14. Remove the DVD or CD drive.
15. Remove the fan assembly.
16. Disconnect the diskette or LS120 drive cable from the system board.
17. Remove the battery charger board.
18. Disconnect the speaker assembly cables.
Next Step
privacy and legal statement