Filter
Top Products
Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
| Home Page | Notice | Preface | Product Description | Troubleshooting
Illustrated Parts Catalog | Removal & Replacement Procedures |
Specifications
Pin Assignments | Battery Pack Operations
Removal & Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Keyboard
Status Panel
Internet
Button Board
Heatspreader
Network
Interface Card
Modem
Hard Drive
DisqPlay
Module
Processor
DVD or
CD Drive
Display Panel
Assembly
Upper CPU
Cover
Fan Assembly
Diskette Drive
Battery
Charger Board
Speaker
Assembly
System Board
Memory
Module
Removing
the Battery
Charger
Board
To remove the
battery charger
board, complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touch pad.
3. Remove the
keyboard.
4. Remove the
heatspreader.
5. Remove the
status panel
assembly.
6. Remove the
Internet Button
board.
7. Remove the
display panel
assembly.
8. Remove the hard
drive.
9. Remove the
Upper CPU cover.
10. Remove two
screws from the
battery charger
board, unplug the
board from the
connector on the
system board, and
lift out of the
chassis.
NOTE:
When
replacing
the battery
charger
board,
ensure that
the pins are
aligned with
the
connector
on the
system
board.
To replace the
battery charger
board, reverse the
previous
procedures.
privacy and legal statement