Filter
Top Products
•
•
•
•
•
Chapter 1
2
Loading specialty papers
Load up to: Make sure:
10 envelopes • The print side is facing you and the
paper guide is against the side of the
envelopes.
• The stamp location is in the upper left
corner.
• The envelopes are loaded
vertically
against the right side of the sheet
feeder.
10 greeting cards, index
cards, postcards, or
photo cards
• The print side is facing you and the paper guide is against
the side of the cards.
• The cards are loaded vertically against the right side of the
sheet feeder.
25 sheets of photo
paper or photocards
• The glossy or coated side is facing you.
• The paper guide is against the side of the paper.
20 sheets of banner
paper
Note:
Make sure you
select Banner or Ban-
ner A4 paper size in
the Printer Properties.
For help, see page 5.
• You place the banner paper
behind the printer. Then bring
the unattached edge of the
first page over the printer and
into the sheet feeder.
• The paper guide is against the
side of the paper.
10 transparencies • The rough side of the transparency is facing you (smooth
side down).
• The paper guide is against the edge of the transparencies.
100 sheets of custom-
sized paper
• The print side is facing you and the paper guide is against
the side of the paper.
• Your paper size fits within these dimensions:
-Width:
76 mm to 215.9 mm
3.0 in.to 8.5 in.
- Length:
127 mm to 432 mm
5.0 in. to 17.0 in.
25 iron-on transfers • You load the iron-on transfers following the instructions on
the package.
• The paper guide is against the side of the iron-on transfers.