Filter
Top Products
5-4 RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: f-ch5 Second Controller Option.doc Last Saved On: 12/4/00 1:48 PM
A Save Configuration screen with a Save to File field appears as shown in
Figure 5-3. The example in Figure 5-3 shows the file name as c:\config1.
Enter your file name in the Save to File field and click Save.
Figure 5-3. Saved configuration
Updating Firmware
CAUTION: If the systems disk is on the RA3000, firmware cannot be upgraded
with SWCC. Establish a temporary system disk on a disk drive outside the
RA3000 and proceed with these instructions or follow the alternative shown in
Section Update Firmware Using Serial Interface.
Updating Firmware Using SWCC
Start SWCC and choose SCSI or Network Connection. From the Storage
menu, select Controller, and then select Update Firmware (Figure 5-4),
Figure 5-4. Update firmware command