Filter
Top Products
4-16 RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: e-ch4 Expansion Pedestal Option.doc Last Saved On: 12/4/00 1:49 PM
16. Transfer the bottom three disk drives (slots 4, 5, and 6) from the base
pedestal to the top three slot locations (slots 0, 1, and 2) in the expansion
pedestal as shown in Figure 4–16.
ID = 8
ID = 9
ID = 10
ID = 11
ID = 12
ID = 13
ID = 14
Expansion Pedestal
3
0
0
0
-4
6
ID = 8
ID = 9
ID = 10
ID = 11
ID = 8
ID = 9
ID = 10
Base Pedestal
Figure 4-16. Transfer drives from base to expansion pedestal
17. Install the new drives in the remaining slots of each pedestal to complete
the installation.
18. Power up the UPS and the two pedestals and then proceed to the
Compaq StorageWorks RAID 3000 Configuration and Maintenance
Guide to configure the expanded subsystem.