Filter
Top Products
Second Controller Option 5-9
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: f-ch5 Second Controller Option.doc Last Saved On: 12/4/00 1:48 PM
Restoring the Configuration
To restore your configuration to the new controller:
1. Restart SWCC in the Serial Mode (refer to the Getting Started RAID
Array 3000 Installation Guide for your host system guide for
instructions).
2. Select the Storage pull-down menu from the Toolbar, then choose
Controller.
3. From the Controller pull-down menu, select Configuration, and then
Restore (Figure 5-9).
Figure 5-9. Restoring configuration to new controller