Filter
Top Products
5-8 RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: f-ch5 Second Controller Option.doc Last Saved On: 12/4/00 1:48 PM
Replacing Existing Controller
1. Replace the existing controller with the new controller
(Figure 5-8 to remove).
Figure 5-8 Remove controller from top slot
NOTE: Ensure that you install the new controller in the same slot as the existing controller
removed in step 1. Do not leave the existing controller in the pedestal while performing
the following step.
2. Power up the system and then restore the configuration on the new
controller as explained in the following section.