Filter
Top Products
Maintenance 3-3
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: RAID Array 3000 Pedestal Storage Subsystem Hardware User’s Guide Comments:
Part Number: EK-SMCPO-UG. C01 File Name: d-ch3 Maintenance.doc Last Saved On: 12/4/00 1:50 PM
Figure 3-1 shows the Pedestal status LEDs.
Figure 3-1. Pedestal status LEDs
SBB Status LEDs
Each disk drive SBB in the pedestal has two status LEDs— a green activity
LED and an amber fault LED as shown in Figure 3–2. When the pedestal is
operating properly, the activity LED is flashing indicating normal disk activity
on the SCSI bus, and the fault LED is off. Table 3–1 lists the states of the SBB
LEDs and recommends corrective actions when an LED indicates a fault
condition.