Filter
Top Products
Display assembly
Description Spare part number
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; Presario, matte black
592146-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; Presario, biscotti
597617-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, biscotti
600163-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, silver (for models 1.1, 1.2 and 1.3 only)
606155-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, white (for model 1.1 only)
606156-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, charcoal (for models 1.2 and 1.3 only)
622571-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, imperial blue (for models 1.2 and 1.3 only)
622572-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; Presario, velvet red (for model 1.2 only)
624966-001
35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, velvet red (for models 1.2 and 1.3 only)
630907-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 52).
5. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module
on page 58).
6. Remove the following components:
a. Keyboard (see
Keyboard on page 63)
b. Optical drive (see
Optical drive on page 56)
c. Top cover (see
Top cover on page 65)
Remove the display assembly:
1. Turn the computer display-side up, with the front toward you.
2. Open the display as far as possible.
3. Remove the wireless antenna cables (1) from the hole and clips built into the base enclosure.
76 Chapter 4 Removal and replacement procedures ENWW