Filter
Top Products
Infortrend
Index-6
RAID (5+0) 1-17
RAID 0 1-4
RAID 1 1-4
RAID 3 1-5
RAID 5 1-5
RAID Expansion:
Example
12-12
RAID Expansion 12-1
RAID expansion with
logical volume
1-16
RAID Level: LCD 5-6
RAID Levels 1-2
2-4
B-1
RAID, advantages 1-1
RAID, definition of 1-2
RAID, level (0+1), disk
striping with mirroring
1-4
RAID, level 0, disk
striping
1-4
RAID, level 1, disk
mirroring
1-4
RAID, level 3, disk
striping with dedicated
parity disk
1-5
RAID, level 5, striping
with interspersed parity
1-5
RAID-Based Mapping 8-14
RCC 8-7
rebuild priority 9-27
Rebuild Settings: LCD 5-14~15
Rebuild Settings:
terminal
7-15
rebuild, automatic 1-9
rebuild, logical drive 5-18
Rebuilding a Logical
Drive: LCD
5-18
Rebuilding Logical
Drive: terminal
7-18
rebuilding, logical drive 5-18
Redefining Channel
Mode: LCD
5-25
Redefining Channel
Mode: terminal
7-25
Redundant
Configuration, Fibre
interface
10-3
redundant
configuration, SCSI
interface
10-2
redundant controller, 10-23, 10-29
assigning logical drives
to secondary
redundant controller,
automatic configuration
of
10-20, 10-26
redundant controller,
explained
10-8
redundant controller, if
one fails
10-25, 10-32
redundant controller,
manual configuration of
10-21, 10-28
redundant controller,
starting up
10-22, 10-28
redundant controller:
automatic configuration
of: LCD
5-5~6
Regenerate Parity B-7
Regenerating Logical
Drive Parity: LCD
5-19
Regenerating Logical
Drive Parity: terminal
7-19, 7-21
Replace after Clone,
Clone Failing Drive
9-2
Replacing a Failed Unit 10-11
Reset Controller: LCD 5-35
Reset Controller:
terminal
7-36
Restore NVRAM from
Disks: LCD
5-36
Restore NVRAM from
Disks: terminal
7-38
Restoring the Default
Setting: LCD
5-33
rolling firmware
upgrade
B-7
RS-232: configuration
via front panel
3-2
S
S.M.A.R.T. 9-1~2, 9-5~8,
B-6
SAF-TE and S.E.S.
Enclosure Monitoring
9-22
SAF-TE, periodic check
time
9-22
SAF-TE/S.E.S. polling
period
B-9
Sample Configuration:
LUN Filtering
8-20
Saving NVRAM to
Disks: LCD
5-36
Saving NVRAM to 7-38