Filter
Top Products
MP1400 Microportable Projector 1-9
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 18 Words: 2366 Saved date: 05/12/004:32 PM File Name: Chap1.doc
Connecting the Projector to a Compaq PC Companion
To connect the projector to a Compaq PC Companion, the PC
Companion must have a male connector adapter and a VGA-out PC
Card with a 15-pin connector.
✎
The VGA-out PC Card with the 15-pin connector is not included
with the Compaq PC Companion. It is sold separately. For
information on purchasing this card, call your Compaq authorized
dealer, or reseller. To locate a reseller near you, call Compaq at 1-
800-AT-COMPAQ or visit the Compaq web site at
http://www.compaq.com/products.
1. Connect one end of the signal cable
1
to the
projector and connect the other end to the VGA-out
PC Card. The VGA-out PC Card may be inserted into
the PC slot on the Compaq PC Companion before or
after connecting the signal cable.
2. Connect one end of the power cord
2
into the back
of the projector, and the other end to an electrical
outlet that is easily accessible and close to the
projector.