Filter
Top Products
3-4 MP1400 Microportable Projector
Part Number: part number177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 8 Words: 1051 Saved date: 05/12/004:32 PM File Name: Chap3.doc
Connecting a Camcorder, VCR, or DVD Player
to the Optional Multimedia Adapter
✎
A rubber boot cover protects the DFP (digital) connector on
the projector. Be sure to remove the cover before connecting
the Multimedia Adapter to the projector and replace the cover
when the projector is not in use to prevent electrostatic
discharges from damaging the connector.
1. Use an RCA cable to connect a VCR to the video
connector
1
on the optional Multimedia Adapter.
Use an S-video cable to connect a camcorder or DVD
player to the S-video connector
2
on the optional
Multimedia Adapter.
2. Connect one end of the power cord
3
into the back
of the projector and the other end to an electrical
outlet that is easily accessible and close to the
projector.
3. To connect the multimedia adapter speaker for
sound, connect the RCA audio cable
4
to the audio-
in port on the optional Multimedia Adapter and the
audio-out port on the VCR, camcorder, or DVD
player. If you are not using the speaker at this time,
skip to the next step.