Filter
Top Products
MP1400 Microportable Projector 5-3
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 6 Words: 970 Saved date: 05/12/004:34 PM File Name: Chap5.doc
Cleaning the Lens
To minimize the risk of damaging the coating or scratching the lens
surface, this cleaning procedure has been developed. The first
recommendation is to remove any dust particles from the lens by
blowing them off with clean, dry, deionized air. However, this may
not be a convenient method, and an alternate method is described
below using the cloth included with the projector.
To clean the lens, use the
clean
cloth that was included with the
projector and follow these steps:
CAUTION:
Do not spray any type of fluid or cleaner
directly on the lens surface. Do not use liquid cleaners on
the cloth as this may contaminate the cloth. Do not directly
touch the lens surface.
1. Wipe the lens in a single direction with the clean,
lint-free, dry cloth. Do not wipe back and forth across
the lens surface.
2. If the cloth is dirty or smears the lens, wash the
cloth. If the cloth is still dirty after washing it or the
fabric is damaged, replace it.
✎
Do not
use fabric softener when washing the cloth or softener
sheets when drying the cloth.
CAUTION:
Do not store the cloth in contact with the lens
for a long time as doing so may contaminate the lens with
dye from the cloth. Keep the cloth in its case when it is not
being used. The cloth can be contaminated if left in the
open air or in a lab coat pocket.