Filter
Top Products
2-2 MP1400 Microportable Projector
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 8 Words: 1421 Saved date: 05/12/004:32 PM File Name: Chap2.doc
Projector Buttons
(Continued)
Symbol Control Function
3
−
Minus button Selects and adjusts the on-screen menu functions.
4
+
Plus button Selects and adjusts the on-screen menu functions.
5 R
Resync button Automatically synchronizes the projector to track
the input source.
IMPORTANT:
To use standby mode, press the
Standby
button and, after a
6- to 10-second delay, the unit enters standby mode and the projector lamp
turns off. A “Going to Standby” message appears on the screen for the
duration of the 6- to 10-second delay. When the message disappears from
the screen, there is a 45-second delay before the lamp can be turned back
on. Wait 45 seconds to allow the lamp to cool before pressing the
Standby
button again.
Introducing the On-Screen Menu
The adjustments for screen settings are located in the on-screen
menu and can be viewed in one of seven available languages.
Analog On-Screen Menu Adjustments
To display the Analog on-screen menu, press the
Select
button on
the projector. The following table shows the functions at each level:
Analog Menu Analog Menu Level 2 Analog Menu Level 3
Brightness Adjustment scale
Contrast Adjustment scale
Position Horizontal Position
Vertical Position
Save and Return
Cancel
Adjustment scale
Adjustment scale
Zoom Zoom
Panning Left-Right
Panning Up-Down
Adjustment scale
Adjustment scale
Adjustment scale
Save and Return
Cancel
Keystone Adjustment scale
Picture Dark—Light
Continued