Filter
Top Products
DIGITAL-LOGIC AG MSB900/L Detailed Technical Manual V1.0
52
X230 JTAG-Port
Pin Signal Pin Signal
1 TCK 2 TMS
3 TDI 4 TDO
X301 VGA Monitor (CRT-Signals)
15pins High-Density DSub
Pin Signal
1 Red
2 Green
3 Blue
13 H-Synch
14 V-Synch
5 + 11 Bridged
5, 6, 7, 8 Grounded
The VGA-CRT signals from J2 must be wired to a standard VGA High Density DSub-connector (female):
The LCD signals must be wired panel-specific.
Solder-side view of the female 15pin HiDSub
1 2 3 4 5
Red Green Blue GND
6 7 8 9 10
GND
11 12 13 14 15
HSyn VSyn
Attention!
If the X10 connector is used, DO NOT connect the VGA signals on the X15 connector!