Filter
Top Products
Removal and Replacement Procedures
Maintenance and Service Guide 5–23
5.13 Display Lid Switch Board
The display lid switch board is included in the Cable Kit (spare
part number 239041-001).
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. Hinge covers (Section 5.5)
b. Keyboard (Section 5.6)
c. Display (Section 5.7)
d. EMI shield (Section 5.8)
e. Top cover (Section 5.9)
2. Turn the top cover bottom side up with the front facing you.
3. Remove the silver M1 × 4.0 screw
that secures the display
lid switch board to the top cover (Figure 5-16).
4. Remove the display lid switch board
from the top cover.
Figure 5-16. Removing the Display Lid Switch Board
Reverse the above procedure to install the display lid switch
board.