Filter
Top Products
Troubleshooting
Maintenance and Service Guide 2–7
Diagnostics Menu
System Configuration Menu
✎
Some of the listed System Configuration options may not be
supported by your computer.
Table 2-3
Diagnostics Menu
Select To do this
Hard Drive Self-Test
options
Run a comprehensive self-test on any hard drive in
the system or on any optional MultiBay hard drive.
Memory Check Run a comprehensive check on system memory.
Startup Check (select
models only)
Verify the system components needed for starting the
computer.
Table 2-4
System Configuration Menu
Select To do this
Language (or press
f2) Change the Computer Setup language.
Boot options ■ Set
f9, f10, and f12 delay when starting up.
■ Enable/disable CD-ROM boot.
■ Enable/disable floppy boot.
■ Enable/disable internal network adapter boot and
set the boot mode (PXE or RPL).
■ Enable/disable MultiBoot, which sets a boot order
that can include most boot devices in the system.
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.