Filter
Top Products
3. Lift the left side of the hard drive cover (2), swing it to right, and remove the cover. The hard drive
cover is included in the Door/Cover Kit, spare part number 417074-001.
4. Remove the two black Phillips PM2.5×4.0 screws (1) that secure the hard drive to the computer.
5. Use the Mylar tab (2) to lift the hard drive (3) until it disconnects from the computer.
6.
Remove the hard drive from the hard drive bay.
7. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws (1)
that secure the hard drive bracket to the hard drive.
48 Chapter 4 Removal and replacement procedures