Filter
Top Products
Wireless switch board
Description Spare part number
Wireless switch board (includes wireless switch board cable) 417092-001
Before removing the wireless switch board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 46).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 47)
b.
WLAN cover (see
WLAN module on page 50)
c.
Optical drive (see
Optical drive on page 57)
d.
Keyboard (see
Keyboard on page 59)
e.
Switch cover (see
Switch cover on page 62)
f.
Display assembly (see
Display assembly on page 64)
g.
Top cover (see
Top cover on page 70)
Remove the wireless switch board:
1. Disconnect the wireless switch board cable (1) from the system board.
2. Remove the two Phillips PM2.0×3.0 screws (2) that secure the wireless switch board to the computer.
Component replacement procedures 75