Filter
Top Products
f.
Top cover (see
Top cover on page 70)
g.
Wireless switch board (see
Wireless switch board on page 75)
h.
Audio board (see
Audio board on page 78)
i.
Bluetooth module (see
Bluetooth module on page 79)
j.
USB board (see
USB board on page 80)
k.
System board (see
System board on page 85)
Remove the ExpressCard assembly:
1.
Turn the system board upside down, with the RJ-45 connector toward you.
2. Lift the insulation material (1) from the system board to expose the ExpressCard assembly rear
screws.
3. Remove the four Phillips PM2.0×4.0 screws (2) that secure the ExpressCard assembly to the system
board.
4.
Turn the system board right-side up, with the RJ-45 connector toward you.
88 Chapter 4 Removal and replacement procedures