Filter
Top Products
Display assembly
Description Spare part number
14.1-inch, WXGA, BrightView display assembly for use in computer models with Intel or AMD
processors (includes microphones)
448611-001
14.1-inch, WXGA, BrightView display assembly for use only in defeatured computer models with AMD
processors
451163-001
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 46).
5.
Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 50).
6.
Remove the following components:
a.
Keyboard (see
Keyboard on page 59)
b.
Switch cover (see
Switch cover on page 62)
Remove the display assembly:
1.
Close the computer and turn it upside down, with the front toward you.
2.
Remove the Phillips PM2.5×9.0 screw that secures the display assembly to the computer.
3.
Turn the computer display-side up, with the front toward you.
4.
Open the display as far as possible.
64 Chapter 4 Removal and replacement procedures