Filter
Top Products
34 R
EMOVAL
S
EQUENCE
P
RESARIO
N
OTEBOOK
M
AINTENANCE
AND
S
ERVICE
G
UIDE
1200XL S
ERIES
Presario 1200 Series
Models: XL101-XL113, XL115, XL118-XL127
Removing the Diskette Drive
To remove the diskette drive, complete the following:
1. Prepare the Notebook for disassembly (pg 10
).
2. Remove the palmrest cover with TouchPad (pg 13
).
3. Remove the keyboard (pg 15
).
4. Remove the Heatspreader (pg 17
).
5. Remove the hard drive (pg 19
).
6. Remove the display panel assembly (pg 27
).
7. Remove the upper CPU cover (pg 31
).
8. Remove the battery charger board (pg 24
).
9. Remove the speaker assembly (pg 33
).
10. Lift up the diskette drive.
11. Disconnect the diskette drive data cable from the system board and remove the
diskette drive from the unit.
To replace the diskette drive, reverse these procedures.
Note: When replacing the diskette drive, ensure that the diskette drive eject lever
is properly inserted in the chassis slot.
Ä
ÄÄ
Ä
CAUTION:
Ensure that cables are placed in their proper locations during the
reassembly process.