Filter
Top Products
www.cooperbussmann.com/BussmannWirelessResources
75
Cooper Bussmann BU-245U-E Wireless Ethernet & Device Server User Manual
”Ipconfig”
“ipconfig” can be used to show your current TCP/IP information, including your address, DNS server addresses, adapter type and so on.
In the above example ipconfig was entered in the command prompt. The reply back shows the PC’s IP address, Subnet mask and the gateway it
is connected to.
Other ipconfig commands will return back more information. The hardware or MAC address of the computer may be discovered using the
command ipconfig /all.
Ipconfig /? lists all of the commands and their usages available for use.
“Arp”
Displays and modifies the IP-to-Physical address translation tables used by Address Resolution Protocol (ARP).
Once a remote computer has been pinged, this can be used to see the IP address & MAC address of the remote computer. It will also show any
other devices on the network that it may be connected to.
Command used for above screen shot is “arp –a.” It shows the PC’s direct IP address of 192.168.0.17 as also shown before with ipconfig
command. The other IP address shown with its associated MAC address is another device with a connection to the PC. In this example it is the IP
address of a PLC connected to the PC also.
3A1576Rev1.6