Filter
Top Products
CRADLEPOINT IBR650 | USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 98
8.1 Administration
Select the Administration submenu item in order to control any of the following functions:
Web Login
Network Time Protocol
Timezone
Bounce Pages
UPnP
Remote Management
GPS
Syslog Settings
8.1.1 Web Login
This password is the administration password. It allows a
user to change router settings. This password can also be
changed through the First Time Setup Wizard. The default
password is found on the bottom of the router.
8.1.2 Network Time Protocol
Enabling NTP will tell the router to get its system time from
a remote server on the internet. If you do not enable NTP
then the router time will be based on when the router
firmware was built, which is guaranteed to be wrong.
Whenever the internet connection is re-established and
once a week thereafter the router will ask the server for the current time so it can correct itself.
You then have the option of selecting an NTP server and adjusting the NTP server port. Any of the given NTP servers will
be sufficient unless, for example, you need to synchronize your router‘s time with other devices in a network.