Filter
Top Products
CRADLEPOINT IBR650 | USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 82
7.6.2 Modem Connection Settings (Advanced Mode Only)
This section changes settings that affect how
modems attempt to connect to the service
provider's network.
Connection Mode: Typically modem connections
are not set to remain on. The router allows you to
set the type of reconnection mode.
Always On: A connection to the internet is
continuously maintained.
On Demand: A connection to the internet is made as needed.
Manual: The administrator has to navigate to the Connection Manager (Internet → Connection Manager) page
and use the control buttons shown in the WAN Interfaces table.
Maximum Idle Time: The interval at which the machine can be idle before the modem connection is disconnected. This
setting is only valid for the "On Demand" and "Manual" connection modes.
Aggressive Reset: When Aggressive Reset is enabled the system will attempt to maintain a good modem connection. If
the internet has been unreachable for a period of time a reset of the modem will occur in attempt to re-establish the
connection.
7.6.3 Modem Configuration Rules (Advanced
Mode Only)
This section allows you to create simple or
complex rules that affect how individual modems
or classes of modems behave in the router.
Click Add to create a new rule.