Filter
Top Products
CRADLEPOINT IBR650 | USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 85
Configuration Rule: Modem Settings
AT Dial Script: Enter the AT commands to be used in establishing
a network connection. Each command must be entered on a
separate line. All command responses must include ―OK‖ except the
final command response, which must include ―CONNECT‖.
Example:
AT
AT+CGDCONT=2,‖IP‖,‖isp.cingular‖
ATCT*99***2#
PPP Authentication Protocol: Set this only if your service provider
requires a specific protocol and the Auto option chooses the wrong
one.
Auto
PAP (Password Authentication Protocol)
CHAP (Challenge Handshake Authentication Protocol)
PPP Password: Password for PPP authentication.
PPP Username: Username for PPP authentication.
SIM PIN: PIN number for GSM modem with a locked SIM.
Access Point Name (APN): Some wireless carriers provide multiple Access Point Names that a modem can connect to.
If you wish to specify an APN, enter it into this field. Some examples of APN are ‗isp.cingular‖ and ―vpn.com‖. This APN
will be set in the first profile position.
LTE Connection Mode: Specify how the LTE Multi Mode modem should connect to the network.
Auto: Let the modem decide which network to use.
Auto EVDO/1xRTT: Connect to CDMA, letting the modem decide which 3G network to use. Do not attempt to
connect to LTE.
Force LTE: Connect to LTE only (do not attempt to connect to CDMA/GSM).
Force EVDO: Connect to CDMA EVDO network only.
Force 1xRTT: Connect to CDMA 1xRTT network only.