Filter
Top Products
CRADLEPOINT IBR650 | USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 95
7.7.7 Global VPN Settings
These settings apply to all configured VPN tunnels. Changing the Global VPN Settings is rarely necessary; the default
values are almost always sufficient.
IKE / ISAKMP Port: Internet Key Exchange / Internet Security Association and Key Management Protocol port.
Default: 500. This is a standard VPN port that usually does not need to be changed.
IKE / ISAKMP NAT-T Port: Internet Key Exchange / Internet Security Association and Key Management Protocol
network address translation traversal port. Default: 4500. This is a standard VPN NAT-T port that usually does not
need to be changed.
NAT-T KeepAlive Interval: Default: 20 seconds. Range: 0-3600 seconds. 20 seconds will be sufficient in almost
all cases.
Tunnel Connect Retry: Default: 30 seconds. Range: 10-255 seconds. 30 seconds will be sufficient in almost all
cases.