Filter
Top Products
System Power Supply Crestron C2N-SPWS300
20 • System Power Supply: C2N-SPWS300 Operations Guide - DOC. 8190
Typical Connection Diagram when Uploading a Project
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport,
or start SIMPL Windows and from the menu bar, select Tools |
Viewport.
2. Refer to the following figure. From the Viewport menu, select Setup |
Communications settings (alternatively, depress Alt+D) to open the
“Port Settings” window.
Setup | Communications Settings Command
3. Select RS-232 as the connection type. Verify that an available COM
port (COM 1 is shown after this step) is selected, and that all
communication parameters and necessary options from the “Port
Settings” window are selected as shown after this step. Click the OK
button to save the settings and close the window.