Crestron electronic DTT-15V3 Computer Hardware User Manual


 
DualTouch™ Technology Touchpanel Crestron DTT-15V3
18 DualTouch™ Technology Touchpanel: DTT-15V3 Operations Guide – DOC. 6632B
Hardware Connections for the DTT-15V3
USB:
TO UPX-2
DC IN (12V):
FROM POWER
SUPPLY
ANALOG RGB OUT:
TO AUXILIARY
MONITOR
ANALOG RGB IN:
FROM UPX-2
USB ACCESSORY (x2):
TO USB KEYBOARD
OR USB MOUSE
PEN HOLDER
KENSINGTON
SECURITY
SLOT
VESA MOUNT
PEN TRAY
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
Recommended Cleaning
Display Casing or Pen
To clean the pen display casing or the pen, use a soft, damp cloth; you can also
dampen the cloth using a very mild soap diluted with water. Do not use paint thinner,
benzine, alcohol, or other solvents to clean the unit casing or pen.
Display Screen
To clean the display screen, use an anti-static cloth or a slightly damp cloth. When
cleaning, apply only a light amount of pressure to the display screen and do not make
the surface wet. Do not use detergent to clean the display screen; this may damage
the coating on the screen. Please note that damage of this kind is not covered by the
manufacturer’s warranty.