Filter
Top Products
DualTouch™ Technology Touchpanel Crestron DTT-15V3
4 • DualTouch™ Technology Touchpanel: DTT-15V3 Operations Guide – DOC. 6632B
3. When loading VisionTools Pro-e files or firmware through the RS-232 port of the control system, be
sure that the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, Toolbox may post the
“Transfer Failed” message.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
This section provides information on the connections, controls and indicators
available on your DTT-15V3.
DTT-15V3 Physical View