Filter
Top Products
CyberResearch
®
CPU Cards CPEx GX-333-X
CyberResearch, Inc. 83
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
Step 10. If users want to install other devices, please operate at this time. If all devices have
been successfully installed, please go to next step.
Step 11. Press Enter to continue Windows XP setup.
Installation Steps under Existing Windows XP
After Windows XP is started, Windows system will automatically find the newly installed adapter
and prompt user to install its driver. Please follow these steps to install the driver:
Step1. When the Found New Hardware Wizard windows appear (Mass Storage Controller),
select Install from a list or specify location (Advanced) and click Next to continue.
Step 2. In the follow-up window, please select "Don't search, I will choose the driver to
install", then click Next to continue.
Step 3. In the follow-up window, please select SCSI and RAID controllers, and then click
Next to continue.
Step 4. In the follow-up window, click Have Disk..., then insert the driver diskette and type in
the driver location: e.g., a CD-ROM, then click OK to continue.
Step 5. In the follow-up window, select ALi SATA/RAID Controller, then click Next to
continue.
Step 6. Confirm the follow-up windows and click the Finish button to continue.
Step 7. Please "confirm" the Digital Signature Not Found window when it appears, when
finished, please restart the computer.
Step 8. Repeat step 1, but select ALi ATA/RAID Controller at step 4.
1.1.4
1.1.5 4. Accessing the ALi RAID Utility
If the SATA ROM configuration options in system BIOS have been properly configured, the RAID
BIOS version and disk drive information should appear after system POST screen.
The BIOS disk drive information should look like the following:
ALi RAID BIOS V1.XX
(c) ALi Corporation 2005, All Rights Reserved.
Identifying IDE drives…
Channel 1 Master: Maxtor xxxxxx
Channel 2 Master: Maxtor xxxxxx
Press Ctrl-A to enter ALi RAID BIOS setup utility
To enter the RAID configuration utility, press ‘Ctrl’ and ‘A’ keys simultaneously.
1. RAID BIOS Setup Menu:
The Serial ATA RAID volume may be configured using the RAID Configuration utility stored
within the ALi RAID controller ROM. The BIOS configuration screen is divided into three
major functional areas: Main Functional Menu, Drive Selection Menu, and a list for the
configured RAID arrays.